{myadvertisements[zone_1]}
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lesson learned
#1
Greetings,

Am pretty sure me only had that kind of a problem in calcs, but, anyway, let me share it with you.  Just in case.

Using intercept method. Getting wrong fixes .  Checked anything a few times, every adding/subtraction.  By the way, I knew what the right fix should be. Just doesn't work. Then recollected oldl engineering rule # 0:  If something is going wrong-check constants.  Anyway, found out that when corrected Declination for proper GMT I added the correction "d" without giving any thought why I am doing it. Just added. In my case it was about 10'.  Then, when I checked NA page and looked down the page, I realized that Decl. is decreasing.  And as soon as I subtracted "d", everything worked fine. Again, I'm sure you know it and pay proper attention to the "tendency" in Decl. to put a correct sign to "d".  Then, when you are using , let say, Pub.229, and correct Hc-then the error in "d" for Decl. does affect Hc.  And eventually intercept itself. 

Never I imagined this kind of error would affect the intercept so much.  In my case it did.

Live and learn. ;> ;>
Reply
{myadvertisements[zone_3]}


Messages In This Thread
Lesson learned - by Rumata - 10-21-2018, 06:47 AM
RE: Lesson learned - by pabrides - 10-21-2018, 09:55 AM
RE: Lesson learned - by Rumata - 10-21-2018, 07:37 PM
RE: Lesson learned - by Rumata - 11-15-2018, 02:16 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)
{myadvertisements[zone_2]}